Big Phat Savings Membership Warehouse

email marketing service



056 LOUD RING BELL

See Details
056 LOUD RING BELL
Suttle loud indoor/outdoor bell- Modular bells and ringers are ideal for factories, farms, offices or any location where an audible signaling device is needed- Contains a modular jack that accepts line cords for plug-in installation and is available in single-line only- 45-130 VAC Ringing Voltage- 90dB- Mechanical ringer- Modular hook-up- Heavy duty- Two 4" bells- Ringer equivalency 1.0- 1 year manufacturer's warranty

Price: $75.00



1 Pair Cross Connect B/W XC-2901-BW

See Details
1 Pair Cross Connect B/W XC-2901-BW
1 Pair Cross Connect Wire- Dynacom cross connect wire- 1 Pair- Blue/white and white/blue- 1000 feet

Price: $48.00



1 Watt 1 Way SlimLine Speaker - Black

See Details
1 Watt 1 Way SlimLine Speaker - Black
SlimLinewall speaker- 1 Watt- One way- Modern and affordable- Easy install (hang on a single screw or use the two screw bosses)- Excellent voice and music quality- Built-in amplifier- Built-in volume control- Black- VALCOM POWER UNITS (-1) SEE ALSO:- VC-V-1092: speaker volume control for up to 150 one way speakers

Price: $73.00



10

See Details
10' 3.5 Mono Plug to 3.5 Mono Plug
Suitable for general audio applications- Fully molded contruction

Price: $1.00



10 Foot Cable Kit

See Details
10 Foot Cable Kit
10ft long cable kit used as either a main suspension drop cable or as a safety cable

Price: $13.00



10

See Details
10' HDMI to HDMI HIGH SPEED W/ ETHERNET
High-definition multimedia interface cables- 10 feet- Compatible with all HDMI®-equipped devices- Carries high-definition digital video and multichannel audio in one cable- HDMI® high speed (Category 2)- Super-flexible satin black PVC outer jacket- Fully molded construction- UL recognized

Price: $9.00



10 Pack Valcom Metal Pre-Construction

See Details
10 Pack Valcom Metal Pre-Construction
Valcom metal speaker support ring10 pack- Used in new construction gypsum (sheetrock) ceilings with 16 inch or 24 inch support structure- Box dimensions: 25"L x 15"W x 4.5"H

Price: $180.00



10 PK of 1.70 RING CABLE MGMT

See Details
10 PK of 1.70 RING CABLE MGMT
Provides flexibility for front and rear cable management with a neat and clean appearanceSuitable for 2-post & 4-post racks, wall mount racks, wall brackets and support various configurationsAvailable in both 1.70" and 3.00" widthsRound edges to prevent cable nicks and scratchesMade from 1/8" x 3/8" cold roll steel with black powder coated finishIncludes #12-24 mounting screws

Price: $22.00



10 PK of 3.00 RING CABLE MGMT

See Details
10 PK of 3.00 RING CABLE MGMT
Provides flexibility for front and rear cable management with a neat and clean appearanceSuitable for 2-post & 4-post racks, wall mount racks, wall brackets and support various configurationsAvailable in both 1.70" and 3.00" widthsRound edges to prevent cable nicks and scratchesMade from 1/8" x 3/8" cold roll steel with black powder coated finishIncludes #12-24 mounting screws

Price: $24.00



100 Stainless Steel Premier Bridge Clips

See Details
100 Stainless Steel Premier Bridge Clips
Stainless steel bridging clip 100 pack

Price: $9.00



100 WATT AMPLIFIER

See Details
100 WATT AMPLIFIER
Bogen 100 watt public address mixer amplifier- Provides mixing of microphones, telephone and auxiliary sources- 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX- Each input controlled by an independent volume control- Treble and bass control- AUX muting by external contact closure for push-to-talk microphones- TEL input for telephone paging applications- TEL input voice-activated (VOX) mute over AUX input- Variable threshold for TEL input voice-activated AUX mute- Audio output for tape recorder or booster amplifier- Outputs for 4-ohm (direct), and 16-ohm, 25V and 70V speaker systems (transformer coupled)- Output jack to connect a tape recorder or booster amplifier- Output jack to connect a general purpose 600-ohm matching transformer (model WMT1A)- Thermal protection and electronic shutdown- Rack mountable with accessory mounting kit (RPK50)- UL and CSA listedBGC100

Price: $452.00



100

See Details
100'Blue Molded Cat5E UTP Patch Cord
Flush-mold-injected booted snagless Category-5E patch cords- Suitable for high-speed data applications, including gigabit ethernet, fast ethernet and 155Mbps TP-PMD/CDDI- 4-pair 24 AWG-stranded copper UTP cable- 100% tested wiring sequence and continuity- Flame retardant - type CM- Exceeds EIA/TIA 568B- UL/cUL or ETL listed

Price: $18.00



10

See Details
10'A-B USB Cable Version 2.0
Premium high-speed USB v2.0 certified cables- Supports 1.5/12/480 Mbps transfer – hot-swappable- Backward-compatible with USBv1.1 devices- Flexible PVC jacket – molded construction- USB Type A male to Type B male connectors- UL Listed

Price: $3.00



10W 70/25V Attenuator White Wallplate

See Details
10W 70/25V Attenuator White Wallplate
9 volume steps plus off position- Fit in a standard single gang, high cube junction box- Set screw wire connection- Accepts up to 12 gauge wire- Mono sound- White plastic plate with plastic knob.- Dimensions: 2 ¼” (W) x 4 ½” (H) x 1 ?” (D)

Price: $19.00



10W Classic Amplifier

See Details
10W Classic Amplifier
Bogen classic amplifier- 10 Watts- Offers dependable performance and flexibility- UL and CSA listed- Designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages- Transformer isolated 4., 8., 16., 25V and 70V output taps- Rear panel auxiliary receptacle- One dedicated MIC 1 input Lo-Z balanced- One switchable MIC 2/AUX 1 input- Contact muting of AUX input- Separate rear panel-mounted TEL volume control- Voice activated muting of AUX input by Tel input- Variable trigger threshold for voice activation- Optional wall mount kitBGC10

Price: $176.00



10

See Details
10'White Molded Cat5E UTP Patch
Flush-mold-injected booted snagless Category-5E patch cords- Suitable for high-speed data applications, including gigabit ethernet, fast ethernet and 155Mbps TP-PMD/CDDI- 4-Pair 24 AWG-stranded copper UTP cable- 100% Tested wiring sequence and continuity- Flame retardant – type CM

Price: $2.00



110 CABLE MGT SPOOL W/O SCREW 10PK

See Details
110 CABLE MGT SPOOL W/O SCREW 10PK
Cable management spool- Plastic- Retains and guides cables- No screws- White-10 Per packICCICACSWDS10

Price: $6.00



110 CABLE MGT SPOOL WITH SCREW 10PK

See Details
110 CABLE MGT SPOOL WITH SCREW 10PK
Cable management spool- Plastic- Retains and guides cables- Includes screws- White-10 Per packICCICACSWDS20

Price: $9.00



110 CONNECTING BLOCK 3-PAIR 10PK

See Details
110 CONNECTING BLOCK 3-PAIR 10PK
Connecting blocks- 3 Pair- Designed for 110-type termination- 10 per bag

Price: $4.00



110 CONNECTING BLOCK 4-PAIR 100 PK

See Details
110 CONNECTING BLOCK 4-PAIR 100 PK
Designed for voice and data applications- Performance exceeds Category 5e connecting hardware requirements specified in TIA/EIA-568-C.2- Color coded and designed for repeated use- Accepts 26-22 AWG solid or stranded wires- Used with IC110 wiring blocks and IC110TC termination caps

Price: $35.00



12345678910...>>